Kaedear Cyber ​​LED Projector Light KDR-K10-W30

[Vehicle inspection compliant Cyber ​​LED projector light]

The aluminum body with a CNC aluminum heat sink structure with excellent thermal conductivity dissipates heat efficiently, ensuring sustained brightness, not just immediately after irradiation. (The higher the temperature, the harder it is for current to flow through the LED, and the brightness drops significantly. The amount of light (lumens) is the brightness immediately after turning on, and lights with poor heat dissipation, such as die-cast aluminum heat sink structures, will reduce the amount of light after the temperature rises.)

[White/yellow switching]

●Switchable between white 6000K (high beam) and yellow 3000K (low beam). (White 6000K: Good visibility on sunny days, easy to introduce as a dress-up element. / Yellow 3000K: Good visibility against diffuse reflections caused by rain or fog.)

●Remote control compatible with 5 different installation methods. (Memorizes ON/OFF state and lighting color, and can be turned on and off with key operation)

[Contents]

2 projectors, remote control, control board, 2 bar mounts (32mm), attachments (22, 25.4, 28.6mm), 2 projector stays, 2 connecting rods, rod bolt M5 x 18, projector bolt M5 x 10, remote control base bolt M2 x 6, spring washer M5, anti-rotation M5, 3 types of mounts for remote control, remote control base mount, hex wrench 4/1.5mm, screw lock, cable tie, double-sided tape, band for remote control, screw lock, instruction manual

[Product Details]

■Brightness: 6000 lumens

■Color temperature: White 6000 Kelvin, Yellow 3000 Kelvin

■ Input: 12-15V

■ Output: 30W per side / 60W left and right,

■Wiring: Always positive, ACC, negative (connecting to body earth without measuring the resistance may cause a voltage drop. Connect directly to the negative battery terminal.)

■ Operation: When power is applied to the ACC, it will start up in the previous lighting state. (Example: White lighting → OFF → ON → White lighting, Off → OFF → ON → Off)

■Material: CNC aluminum alloy, glass

■ Remote control: <Short press> OFF → ON → Yellow → White → Yellow, <Long press> ON → OFF

■Projector: Hard glass is used (a special glass material with low expansion rate, high heat resistance, high strength, high hardness, high transmittance, and high chemical stability). It is less likely to develop lens yellowing or fourth spots.

■Cut line: Can be used as a passing light without causing inconvenience to oncoming vehicles.

Bar mount diameter: 32/28.6/25.4/22/mm

■Angle adjustment: 360 degree adjustment in three directions: pitch, yaw, and roll

■Bracket: 4 connection screw holes (separate brackets can also be used for fixing)

■Options: Fork clamp bar KDR-H11, Fender clamp bar KDR-H21

■Waterproof level: IP67

■Compliant with vehicle inspections: If the product is not installed in the location specified by the safety standards, it may not pass the vehicle inspection or you may be penalized for using it in accordance with the Road Transport Vehicle Law. The final decision is left to the discretion of the inspector.

[Manufacturer's warranty]

■Manufacturer's warranty period: 1 year (expires on the same day as purchase)

At Kaedia, we provide after-sales support to ensure customer satisfaction. If you have any questions about our products or about installing them on your motorcycle, our nationally certified staff will be happy to assist you with any specialized knowledge you may have. In the unlikely event that the defect is diagnosed as being due to a product defect, we will review the matter based on our manufacturer's warranty regulations and provide free repairs or replacements under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be halved (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will provide support after installation and after use. As a Japanese manufacturer, we will provide support with a spirit of hospitality. Please feel free to contact us.