Metal Claw QI KDR-M23A

[Metal Claw QI]

A smartphone holder made entirely of aluminum alloy. The upper arm can be pushed up with the smartphone to attach and detach the smartphone. The height of the lower arm can be adjusted to adjust the wireless charging position according to the smartphone model. The claw can be adjusted in six stages from 13 to 18 mm according to the thickness of the smartphone. The guide arms on both sides make it easy to aim at the center and prevent lateral shifting. The arm can be fixed with the dial on the back to prevent the arm from opening due to impact while driving. The standard vibration absorbing damper efficiently absorbs high frequencies caused by engine vibrations, reducing the risk of damage to the smartphone camera's image stabilization function. "I'm worried about the deterioration of plastic," "I just want a sturdy aluminum holder," "I want a holder with a metallic feel that doesn't overlap with the surroundings," and "I want a QI compatible holder," this is the model KDR-M23A recommended for such people.

[Compatible models]

iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14Pro / 14Pro max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE 3 / SE 2 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 / 8 Plus / Samsung Galaxy / Google Pixel / Kyocera Torque / Sony Xperia / Sharp Aquos, other QI compatible models *Please check the actual size including the conditions of smartphone accessories such as cases. It is suitable for holding and charging, and the exposure of the camera is not included in the conditions. ■Height 125-180mm, width 63-90mm (please check that the size of your smartphone model is within the range.)   ■Thickness 18mm or less (be careful of thick smartphone models and cases.) ■Excellent compatibility as it can accommodate a maximum thickness of 18mm without being affected by smartphone cases or bunker rings. ■If the smartphone case contains metal or magnetism, it will detect it and the protection will be activated and stop for safety. If the smartphone case is thick, the wireless charging distance will be insufficient and charging will not occur. ■In case of an emergency, we recommend using a safety strap KDR-SFB-S or a carabiner to connect to the handle after setting the holder to prepare for unforeseen circumstances.

[QI charging]

QI wireless charging is possible with two input methods: vehicle 12V and USB (QC3.0).

■Output: QI15W/10W/7.5W/5W *Charges at the power required by the model.

■12V input: Connect to the vehicle's 12V power source to use wireless charging. *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles.

■USB input: Connect to USB power supply QC3.0 for wireless charging. * Main unit connector type A. The power supply of the mobile battery may be cut off by power consumption reduction control. Do not get the USB connector wet in rainy weather.

■Waterproof: IP66 waterproof, can withstand sudden rain.

■Power switch: ON/OFF only. When 12V is applied from 0V, the power automatically turns on.

■12V wiring: 1.75m inconspicuous black double cord (white lettering on the positive side), (with fuse holder, terminal block, convertible to stag beetle terminal)

■USB cable: 1.2m inconspicuous black double cord (positive side has white lettering)

■Caution: If you are unfamiliar with voltage drop (including professionals), please wire the negative wire directly to the negative battery terminal. Body earth can only be used if it is confirmed that the resistance between the negative battery terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as the handle. Please also be aware of voltage drop due to reduced contact area of ​​crimp terminals. *The voltage of earth resistance is normal when there is no load, but drops when a load is applied.

To check the power supply, always measure the load voltage under the following conditions: (Wiring is connected and the circuit is complete, the smartphone holder's power switch is ON, and the probe is placed on the SAE connector with a gap between them to measure.) * Measuring the voltage without load will not determine whether the power supply is good or bad.

[Product Specifications]

■ Holder size: Height 125-180mm, width 63-90mm, thickness 18mm

■Material: Aluminum alloy

Weight: 471g

■Set contents: Main body (1 inch ball), bar mount (1 inch ball / 32 mm / width 15 mm), diameter conversion attachment (12 / 22 / 25.4 mm), 2 mm rubber tape, hexagonal wrench, 60 mm aluminum intermediate mount (KDR-R1-3) * SST included, silicone pad for changing arm color, SAE harness (fuse holder / Giboshi), conversion terminal (flat Y-shaped / stag beetle terminal), USB harness, spare fuse, cable tie, instruction manual

■Brand: Kaedear

[Manufacturer's warranty]
■Manufacturer's warranty period: 1 year (expires on the same day as purchase)
Kaedia will support you even after the sale so that you can be satisfied. We have staff who are nationally qualified to handle any questions about the product, as well as any consultations about installation on your motorcycle, so we will respond appropriately to your specialized knowledge. In the unlikely event that the defect is diagnosed as being due to a product defect, we will review the matter based on our manufacturer's warranty regulations and repair or replace it free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be half the period (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the month of purchase plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will respond with a hospitable spirit. Please feel free to contact us first. ■The iPhone 11 series may not be able to display accurate GPS while wirelessly charging. This may be resolved by updating iOS.