Takumi Bike Cover Version 2 LL Euro [TA932-LLU]

Takumi Bike Cover has been renewed [Version 2 released]

The Takumi motorcycle cover has a unique double structure. To protect the motorcycle from rain, wind, dust, and UV rays, the outer and inner covers are manufactured separately, and the highest quality materials are used for each part. Each cover is manufactured with a unique three-dimensional cut, and it takes the same amount of effort to manufacture as two regular covers. The outer cover is gunmetal coated to prevent deterioration due to UV rays, and is finished with double stitching to reduce water penetration and increase the sewing strength of the joints. The inner cover is made of highly heat-resistant material for each part to reduce scratches on the motorcycle. This is a masterpiece created by the craftsman's technique to meet the high level of requirements for a motorcycle cover, such as everyday usability and fitting.

Product description

Carefully made domestic products.
Double-layered construction. Quality-oriented. The inner cover is made of a material that will not melt. Ready to use immediately after stopping.
Size: LL Euro Overall length 230 Overall height 150 Overall width 100 Tail height 120 Rear width up 60 Rear width down 60 (cm)
[Main compatible models] Suzuki: B-KING BMW: K1200R/Sport, R1150RT, C650GT/C600 *Top box included with LL top box (front length is slightly shorter) Triumph: Sprint ST

[Product Features]

●Main material: The gunmetal outer layer is "polyester OX250 denier."
It is UV resistant and highly durable.

●Main body material: The black inner lining on the inside of the rear is a special heat-resistant material called "broadcast."
You can safely touch the engine, muffler, etc. after the vehicle has stopped.

Main body material: The upper front part of the inner lining,
The screen and handle are made of a highly protective soft material called "polyester panlace."

●Stitching: Double stitching to improve strength and reduce water penetration.
All seams are double stitched and double sewn.

●Center belt to prevent scattering. Can be removed from either the left or right side.
Uses advanced inner material that is also used in Takumi Advance.
It won't melt even with the heat of the muffler.

●Double-sided buckle with bell and adjuster on center belt to prevent scattering.
It is resistant to pulling and does not easily come loose. Equipped on both sides.

-Two handles on the front for easy removal and installation
One is placed at the back for improved operability. Made of material that is resistant to UV degradation.

●Lock holes on the front and back for security equipment.
The front is color-coded yellow and the back is color-coded black, making it easy to distinguish between the front and back when the cover is attached.

●Equipped with double stopper hem drawstrings on the front and back.
It uses double stoppers that are used in serious outdoor products and can withstand strong winds.

●Air venturis installed on both sides of the air vent.
This is a design that prevents moisture from accumulating inside and prevents rust from occurring.

●Tail mark: Commitment to ease of use in daily life. Only the rear panel is black,
This mark is used to distinguish between front and rear when installed.

●Storage bag: Comes with a special storage bag. Made of breathable mesh material,
It is easy to use even if the cover itself is wet.

【material】
Body surface: Polyester Oxford 250 denier (gunmetal coating)
Back of the main unit: Broadcloth (black)
Back top: Polyester pan lace (screen protection)
Belt: Advanced inner (flame and melt resistant)

---------Size LL Euro Overall length 230 Overall height 150 Overall width 100 Tail height 120 Rear width up 60 Rear width down 60 (cm)


[Main compatible models]
・Suzuki: B-KING

・BMW: K1200R/Sports, R1150RT,
C650GT/C600
*Top box included is LL top box.
(The front is a little short.)

・Triumph: Sprint ST

*For vehicle models not listed, please compare the product size with the actual size of the vehicle to make your decision.

Disclaimer: Please read

[Precautions when installing Takumi Bike Cover]

The Takumi Bike Cover has a double layer structure.

1. The inner cover (the black cover on the inside) is made of a heat-resistant material.
The outer cover (the outer silver cover) is not made of heat resistant material.
The outer cover will melt due to heat.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. The outer cover will melt if it comes into contact with anything hot.
While the motorcycle body is hot,
Do not allow the outer cover to come into contact with hot surfaces.
Please be careful when putting the cover on.

3. If you are concerned, please wait until the motorcycle has cooled down to a certain extent before putting the cover on.

[Functions discontinued from the previous model]
The large Velcro belt and S-hook attachment at the rear have been discontinued.