Takumi Bike Cover Version 2 LL Side Box [TA932-LLSB]

Product Details

Takumi Bike Cover has released a renewed version 2

The Takumi motorcycle cover has a unique double structure. To protect your motorcycle from rain, wind, dust, and UV rays, the outer and inner parts of the cover are manufactured separately and the highest quality materials are used for each part.
Each cover is made with a unique three-dimensional cut, and is produced with the same amount of effort as two regular covers. The outer cover is gunmetal coated to prevent deterioration due to UV rays, and is finished with double stitching to reduce water ingress and increase the strength of the stitching at the joints.
The inner lining is made of heat-resistant material that reduces scratches on the bike. It is a masterpiece made by skilled craftsmen to meet the high standards required for a bike cover, such as everyday usability and fitting.

■ Size: LL side box size (※ Compatible with LL vehicle side boxes)
■ Overall length: 230, overall height: 140, overall width: 100, tail height: 110, upper rear width: 110, lower rear width: 110 (unit cm)
■ Material: Main body surface: Polyester Oxford 250 denier (gunmetal coating), Main body back upper front part: Screen and mirror part: Polyester pan lace (screen protection), Back rear part: Broad belt: Advanced inner (flame retardant and melt resistant)
■ Compatible with side boxes for LL vehicles = {LL compatible domestic vehicles} [HONDA] CB1300 SB/SF, VFR1200, CBR1100XX, NC750/700, [YAMAHA] MT-01, XJR1300/1200, VMAX (up to 2008), FZ-1 FAZER, [SUZUKI] GSX1300R HAYABUSA, Bandit 1250/1200, GSX1100S KATANA, GSR600/400/250, [KAWASAKI] ZZR 1400/1200, ZRX 1200/DAEG, ZEPHYR 1100/RS, W800/650/400
■ Compatible with LL vehicle side boxes {LL compatible imported vehicles} [DUCATI] MONSTER 1200/821, [BMW] R1200R, [TRIUMPH] Speed ​​Triple, [KTM] 990 SUPER DUKE,

Product description

The double structure of outer and inner layers provides maximum protection for your bike and practical performance.
Made in Japan quality that goes beyond the standards of ready-made bike covers.

● "I want to protect my bike with a cover."
This is a product that was created with this thought in mind.
We've included every possible aspect.

[Product Features]

●Main material: The gunmetal outer layer is "polyester OX250 denier."
It is UV resistant and highly durable.

●Main body material: The black inner lining on the inside of the rear is a special heat-resistant material called "broadcast."
You can safely touch the engine, muffler, etc. after the vehicle has stopped.

Main body material: The upper front part of the inner lining,
The screen and handle are made of a highly protective soft material called "polyester panlace."

●Stitching: Double stitching to improve strength and reduce water penetration.
All seams are double stitched and double sewn.

●Center belt to prevent scattering. Can be removed from either the left or right side.
Uses advanced inner material that is also used in Takumi Advance.
It won't melt even with the heat of the muffler.

●Bell and adjuster attached to center belt to prevent double-sided buckle from scattering.
It is resistant to pulling and does not easily come loose. Equipped on both sides.

-Two handles on the front for easy removal and installation
One is placed at the back for improved operability. Made of material that is resistant to UV degradation.

●Lock holes on the front and back for security equipment.
The front is color-coded yellow and the back is color-coded black, making it easy to distinguish between the front and back when the cover is attached.

●Equipped with double stopper hem drawstrings on the front and back.
It uses double stoppers that are used in serious outdoor products and can withstand strong winds.

●Air venturis installed on both sides of the air vent.
This is a design that prevents moisture from accumulating inside and prevents rust from occurring.

●Tail mark: Commitment to ease of use in daily life. Only the rear panel is black,
This mark is used to distinguish between front and rear when installed.

●Storage bag: Comes with a special storage bag. Made of breathable mesh material,
It is easy to use even if the cover itself is wet.

【material】
Body surface: Polyester Oxford 250 denier (gunmetal coating)
Back of the main unit: Broadcloth (black)
Back top: Polyester pan lace (screen protection)
Belt: Advanced inner (flame and melt resistant)

[Changes from the previous model]
1. The center belt has been changed to a heat-resistant specification.
2. The stitching has been changed to double stitching and strengthened to reduce the intrusion of rainwater.
3. The number of handles on the upper front has been increased to two, making it easier to remove.
4. The handle is now made of UV-resistant belts that are less susceptible to deterioration due to UV rays.
5. The storage case is made of a hybrid of mesh and taffeta.

Caution (Disclaimer) > Please read carefully [Caution when installing Takumi Bike Cover]

The Takumi Bike Cover has a double layer structure.

1. The inner cover (the black cover on the inside) is made of a heat-resistant material.
The outer cover (the outer silver cover) is not made of heat resistant material.
The outer cover will melt due to heat.
~~~~~~~~~~~~~~~~~~~~~~~~~~~~~
2. The outer cover will melt if it comes into contact with anything hot.
While the motorcycle body is hot,
Do not allow the outer cover to come into contact with hot surfaces.
Please be careful when putting the cover on.

3. If you are concerned, please wait until the motorcycle has cooled down to a certain extent before putting the cover on.

[Functions discontinued from the previous model]
The large Velcro belt and S-hook attachment at the rear have been discontinued.