Power Grip USB KDR-M8

[Power Grip USB] The Power Grip is characterized by its ability to hold your smartphone in place with a clamping pressure like a vice. Turn the dial on the right to open and close the arm. The structure allows you to reduce the size of the holder. The holder has a built-in USB power supply. "I don't want to attach something large around the handlebars," "I want to consider cooling my smartphone in the summer," "I want to use my camera while my smartphone is attached to the holder," "I feel uncomfortable if I don't fix it firmly manually," and "I want to charge it with a cable." This is the KDR-M8 model, recommended for such people.

[USB charging] Connect to a 12V vehicle and use USB power. ■ Output: USB (Type A) 18W (5V3A/9V2A/12V1.5A) *Charges with the power required by the model. ■ Input: 12V vehicle power supply *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles. ■ Waterproof: IP66 waterproof to handle sudden rain. ■ Power switch: ON/OFF mechanical switch ■ Wiring: 1.75m inconspicuous black double cord (positive side is white lettering line), (with fuse holder, with Giboshi, can be converted to Kuwagata terminal) ■ Note: If you do not understand voltage drop (including businesses), please wire the negative directly to the battery negative terminal. Body earth can only be used if you can confirm that the resistance value of the battery negative terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as handles. Please be careful of voltage drop due to reduced contact area of ​​crimp terminals. *The voltage of the earth resistance is normal when there is no load, and the voltage drops when a load is applied. To check the power supply, always measure the load voltage under the following conditions: (Wiring is connected and the circuit is complete, the smartphone holder's power switch is ON, and the probe is placed on the SAE connector with a gap between them to measure.) * Measuring the voltage without load will not determine whether the power supply is good or bad.

[Compatible models] Apple iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Pro / 14Pro Max / 14Plus / 13 / 13Pro / 13Pro Max / 13mini / 12 / 12Pro / 12Pro Max / 11 Pro Max / 11 Pro / 11 / XS Max / XR / X / 8 Plus / 8 / 7 Plus / 7 / SE2 / SE3 Please check the actual size including the conditions of smartphone accessories such as cases. This is a fit for holding, and the exposure of the camera is not included in the conditions. Please also pay attention to the position of the side button. ■Arm depth: 76mm (Please be careful of interference with the side buttons.) ■Width: 60~90mm (Please use a case for smaller smartphone models.) ■Thickness: 12mm or less (Please be careful with thick smartphone models and cases.) ■As a precaution against the unexpected, we recommend using the safety band KDR-SFB-C, or the strap KDR-SFB-S, a carabiner, etc., and connecting it to the handle after setting the holder.

[Product Specifications] ■Holder size: Arm depth 76mm, width 90mm-60mm, thickness 12mm ■Material: Aluminum alloy (mount) + reinforced plastic PA66+GF ■Weight: 122g ■Set contents: Main body (17mm ball), bar mount (17mm ball/32mm/width 15mm), mirror mount (clamp 22mm/M10/thickness 7mm), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, safety band, hex wrench, conversion terminal (flat Y-shaped/stag beetle terminal), spare fuse, cable tie, instruction manual ■Brand: Kaedear

[Manufacturer's warranty]
■Manufacturer's warranty period: 1 year (expires on the same day as purchase)
Kaedia will support you even after the sale so that you can be satisfied. We have staff who are nationally qualified to handle your questions about the product, as well as questions about installation on your motorcycle, so we will respond appropriately to your specialized knowledge. If the problem is diagnosed as being due to a product defect, we will review it based on our manufacturer's warranty regulations and repair or replace it free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be half the period (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will respond with a spirit of hospitality. Please feel free to contact us first.