Quick Adjuster/Air Mount KDR-M33A-HB (Clamp/Charging Function)

[Quick Adjuster QI & USB]

The Power Grip QI & USB model, which features "camera exposure," "compactness," and "firm fixation," had the drawback that the wireless charging position shifted depending on the size of the smartphone. The Quick Adjuster QI & USB allows the side arm to be minimized and the lower arm to be adjusted in length, making it compatible with a wider range of smartphone models. The small size of the main unit also means that it has little impact on the visual appearance around the handlebars.

"I don't want to attach a holder that is noticeable around the handlebars.", "There are no compact holders that support wireless charging.", "It feels uncomfortable if I don't securely fix it manually.", "I want to be able to use the camera while my smartphone is attached to the holder." The KDR-M33A-HB model is recommended for people like this.

[Compatible models]

iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14pro / 14pro max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE3 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 Plus / Samsung Galaxy / Google Pixel / Kyocera Torque / Sony Xperia / OPPO / Sharp Aquos, other QI compatible models *Please check the actual size including the conditions of smartphone accessories such as cases. Please also pay attention to the position of the side button. ■Arm width 66~88mm (Please use a case for small smartphone models) ■Thickness 14mm or less (Please be careful of thick smartphone models and cases.) ■The length of the smartphone is not affected.

[QI charging & USB charging]

QI wireless charging and USB power can be used with the vehicle's 12V voltage.

*Adjust the lower arm so that the wireless charging position of your smartphone model is set in the center of the holder. When doing so, please check in advance that the side button does not interfere.

■Output: QI 15W/10W/7.5W/5W, USB (Type C) 36W (5V3A/9V2A/12V3A) *Charging will be performed at the power required by the model.

■12V input: Connect to the vehicle's 12V power source to use wireless charging and USB power. *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles.

■USB input: Cannot be used with USB input.

■Waterproof: IP66 waterproof, can withstand sudden rain.

■Power switch: This product does not have a power switch, so please connect it to an accessory power source or unplug the SAE connector after turning the key off. When ACC is turned on, the indicator light on the top of the back lights up and QI wireless charging and USB power can be used. If there is no output for 1 minute, the indicator light will turn off, but a dark current of 2mA will be generated.

■12V wiring: 1.5m inconspicuous black double cord (white lettering on the positive side), (with fuse holder, terminal block, convertible to stag beetle terminal)

■Note: If you are not familiar with voltage drop (including professionals), please wire the negative directly to the negative battery terminal. Body earth can only be used if it is confirmed that the resistance between the negative battery terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as the handle. Please be careful of voltage drop due to reduced contact area of ​​crimp terminals. *The voltage of the earth resistance is normal without load, but the voltage drops when a load is applied. To check the power supply, be sure to measure the load voltage under the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON, and the probe is placed on the SAE connector with a gap to measure) *Voltage measurement without load does not determine whether the power supply is good or bad.

[Quick lever type]

A quick-lever type that tightens like a vice to hold your smartphone in place. The deep arm provides excellent structural holding power in addition to the clamping pressure.

① Turn the dial on the left to adjust the arm in advance so that the smartphone is firmly fixed when the lever is tilted down. →② Insert the smartphone and tilt the lever to fix the smartphone in place. ③→ Raise the lever to remove the smartphone from the top.

*If the shape of the side of the smartphone is gourd-shaped or uneven due to the influence of the smartphone case, etc., you may not be able to insert or remove the smartphone by operating the lever alone. In that case, you will need to adjust the dial each time.

[Air Mount]

The standard air mount floats the holder with an air cap like an air suspension, efficiently absorbing high frequencies caused by engine vibrations and reducing the risk of damage to the smartphone camera's image stabilization function. It has a vibration reduction effect that exceeds that of a separate vibration absorber, and improves posture stability against gaps such as steps.

[Clamp mount]

Clamp type that is easy to attach to clamp bars, handlebar braces, etc. The clamp part is also made of aluminum alloy. The powder coating has high coating strength and is highly resistant to scratches and corrosion. It is low-profile, so when attached to a multi-bar, the back of the holder does not become bulky and can be kept neat. It has a moderate rotation structure, so you can rotate your smartphone vertically or horizontally without loosening it.

*Angle adjustments other than the direction of rotation are not possible.

[Product Specifications]

■Size: Arm width 66-88mm, thickness 14mm or less, lower arm adjustment range 49mm

■Material: Polycarbonate + stainless steel + aluminum alloy

■Contents:■Contents: Main body (clamp 22mm), diameter conversion attachment (12.0/16.0/19.0), SAE extension harness 20cm, vehicle 12V harness 130cm, conversion harness (flat Y-shaped/stag beetle terminal), 2mm rubber tape, cable tie, hex wrench, instruction manual

■Brand: Kaedear

*As a precaution, we recommend using a safety strap (KDR-SFB-S) or a carabiner to connect your smartphone to the vehicle after setting up the holder to prepare for unforeseen circumstances.

[Manufacturer's warranty]

■Manufacturer's warranty period: 1 year (expires on the same day as purchase)

At Kaedia, we provide after-sales support to ensure customer satisfaction. If you have any questions about our products or about installing them on your motorcycle, our nationally certified staff will be able to provide you with the appropriate specialized knowledge. In the unlikely event that the defect is diagnosed as being due to a product defect, we will review the matter based on our manufacturer's warranty regulations and provide free repairs or replacements under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be halved (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will provide support after installation and after use. As a Japanese manufacturer, we will provide support with a spirit of hospitality. Please feel free to contact us.