Ultima Blade/Air Mount KDR-M27PA (1 inch ball/charging function)

[Ultima Blade QI&USB]

A luxurious aluminum alloy smartphone holder. The aluminum claws covered with a silicone cover hold the smartphone. The three arms reduce the presence of the holder and make the handlebars look beautiful. Comes standard with an Air mount to prevent the risk of damage to the camera's image stabilization function. The claws have a height adjustment structure that fits smartphones of different thicknesses. 1-inch ball mount specification that is easy to attach to the handlebars. The upper and lower claws slide while pressing the button, and can be instantly adapted when changing smartphone models. The one-way arm can be easily removed with one touch by manually holding the smartphone until it stops moving and pressing the arm release PUSH button. QI wireless charging is also possible, supporting a comfortable bike life.

"I want a smartphone holder that is made entirely of high-quality aluminum," "I want a smartphone holder that supports QI charging."

The KDR-M27PA is recommended for those who are looking for a smartphone holder that can flexibly adapt to changes in smartphone models.

[Compatible models]

iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 /  14Pro / 14Plus / 14Pro max /13 / 13 Pro Max / iPhone 13 Pro / 12 / 12 Pro / 12 Pro Max / 11 / 11Pro / 11Pro Max / X / XR / XS / XS MAX / 8/ 8PLUS / SE 2nd and 3rd generation / Samsung Galaxy / Google Pixel / OPPO / Kyocera Torque / Other QI-compatible models

Non-QI compatible models: iPhone 7/6/other non-QI compatible models

*Please check the actual size including the conditions of smartphone accessories such as cases. This applies to holding and charging, and does not include camera exposure.

■Width 128.3~193mm, height 65~93mm (Please make sure that the size of your smartphone model is within this range.) Thickness 19mm or less (Please be careful with thick smartphone models and cases.) ■Just in case of an emergency, we recommend using the safety strap KDR-SFB-S or a carabiner to connect it to the handle after setting the holder, to prepare for the unexpected.

[QI charging & USB charging]

QI wireless charging and USB power can be used with the vehicle's 12V voltage.

*Adjust the slide arm so that the wireless charging position of your smartphone model is set in the center of the holder.

■Output: QI 15W/10W/7.5W/5W, USB (Type C) 36W (5V3A/9V2A/12V3A) *Charging will be performed at the power required by the model.

■12V input: Connect to the vehicle's 12V power source to use wireless charging and USB power. *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles.

■USB input: Cannot be used with USB input.

■Waterproof: IP66 waterproof, can withstand sudden rain.

■Power switch: ON/OFF only. When 12V is applied from 0V, the power automatically turns on.

■12V wiring: 1.75m inconspicuous black double cord (white lettering on the positive side), (with fuse holder, terminal block, convertible to stag beetle terminal)

■Repair: The 12V adapter (with USB power supply) has a separate structure and can be replaced.

■Note: If you are not familiar with voltage drop (including professionals), please wire the negative directly to the negative battery terminal. Body earth can only be used if it is confirmed that the resistance between the negative battery terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as the handle. Please be careful of voltage drop due to reduced contact area of ​​crimp terminals. *The voltage of the earth resistance is normal without load, but the voltage drops when a load is applied. To check the power supply, be sure to measure the load voltage under the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON, and the probe is placed on the SAE connector with a gap to measure) *Voltage measurement without load does not determine whether the power supply is good or bad.

[Product Specifications]

■Holder size: Width 128.3~193mm, height 65~93mm, thickness 19mm or less (The height of the claw can be adjusted by removing the claw with the included Torx bolt and replacing the adapter.)

■Material: Aluminum alloy (main body, mount), polycarbonate (QI charging part) + silicone (protective cover)

Weight: 291g

■Set contents: Main body (1 inch ball) + aluminum intermediate mount (anti-theft bolt specification) + bar mount (clamp 32mm / 1 inch ball) + diameter conversion attachment (12.0 / 22.0 / 25.4 / 28.6mm) + hex wrench + Torx wrench + rubber tape + 12V adapter (with USB power supply) + adapter holder (for intermediate mount) + SAE harness (fuse holder / Giboshi) + conversion harness (flat Y-shaped / stag beetle terminal) + cable tie + instruction manual

■Brand: Kaedear

[Manufacturer's warranty]

■Manufacturer's warranty period: 1 year (expires on the same day as purchase)

At Kaedia, we provide after-sales support to ensure customer satisfaction. If you have any questions about our products or about installing them on your motorcycle, our nationally certified staff will be happy to assist you with any specialized knowledge you may have. In the unlikely event that the defect is diagnosed as being due to a product defect, we will review the matter based on our manufacturer's warranty regulations and provide free repairs or replacements under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be halved (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will provide support after installation and after use. As a Japanese manufacturer, we will provide support with a spirit of hospitality. Please feel free to contact us.