Slide Lock/Air Mount KDR-M28A (Smartphone Charging Holder)

[Slide lock]

A smartphone holder that allows you to attach and remove your smartphone with minimal sliding movement by synchronizing the upper arm and lower arm with a metal gear. As the demand for motorcycles for business use increases, this model allows for long-term use in severe conditions while maintaining the ease of attaching and removing your smartphone. You can attach and remove your smartphone by pushing the upper or lower arm with your smartphone. The arm can be fixed with a side lever so that it does not open due to impact while driving. The standard [Air Mount] has an air cap like an air suspension that floats the holder, efficiently absorbing high frequencies caused by engine vibrations and reducing the risk of damage to the smartphone camera's image stabilization function. It has a vibration reduction effect that exceeds that of a separate vibration absorber, while improving posture stability against gaps such as steps. The KDR-M28A model is recommended for those who want a durable structure but also want to ensure the ease of attaching and removing their smartphone, who want QI compatibility with the Air Mount, and who feel more secure with arms that have a square bend.

[Compatible models]

iPhone 15 / 15Pro / 15Pro Max / 15Plus / 14 / 14Plus / 14pro / 14pro max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE 3 / SE 2 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 / 8 Plus / 7 / 6 / Samsung Galaxy / Google Pixel / Kyocera Torque / OPPO / Others, *Please check the actual size including the conditions of smartphone accessories such as cases.

This is a condition for compatibility with the hold, and camera exposure is not included in the conditions. ■Non-compatible models: Xperia, Aquos (QI charging position is not in the center) ■Vertical width 130-190mm, horizontal width 65-85mm (Please check that the size of your smartphone model is within the range.) ■Thickness 17mm or less (Please be careful of thick smartphone models and cases.) ■It can accommodate a maximum thickness of 17mm without being affected by smartphone cases or bunker rings, so it has excellent compatibility. ■Smartphone cases with protrusions on the squares will cause the upper and lower arm surfaces to float. ■In case of an emergency, we recommend using a safety strap KDR-SFB-S or a carabiner to connect to the handle after setting the holder to prepare for unforeseen circumstances.

[QI charging & USB charging]

QI wireless charging and USB power can be used with 12V vehicle. ■Output: QI 15W/10W/7.5W/5W, USB (Type C) 36W (5V3A/9V2A/12V3A) *Charges with the power required by the model. ■12V input: Connect to the vehicle's 12V power supply to use wireless charging and USB power. *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles. ■USB input: Cannot be used with USB input.

■Waterproof: IP66 waterproof, can withstand sudden rain. ■Power switch: ON/OFF only. When 12V is received from 0V, the power automatically starts. ■12V wiring: 1.75m inconspicuous black double cord (positive side is white lettering line), (with fuse holder, with giboshi, can be converted to stag beetle terminal) ■Repair: 12V adapter (with USB power supply) is a separate structure and can be replaced.

■Note: If you are unfamiliar with voltage drop (including professionals), please wire the negative directly to the negative battery terminal. Body earth can only be used if it is confirmed that the resistance between the negative battery terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as the handle. Please be aware of voltage drop due to reduced contact area of crimp terminals. *The voltage of the earth resistance is normal without load, but the voltage drops when a load is applied. To check the power supply, be sure to measure the load voltage under the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON, and the probe is placed on the SAE connector with a gap to measure) *Voltage measurement without load does not determine whether the power supply is good or bad.

[Product Specifications]

■Holder size: Height 130-190mm, width 65-85mm, thickness 17mm ■Material: Aluminum alloy (mount) + reinforced plastic PA66+GF ■Weight: 450g ■Set contents: Main body (1 inch ball), bar mount (1 inch ball/32mm/width 15mm), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, hex wrench, 60mm intermediate mount (anti-theft type/with 12V adapter holder), 12V adapter with USB power supply, SAE harness (fuse holder/giboshi), conversion terminal (flat Y-shaped/stag beetle terminal), cable tie, instruction manual, *The intermediate mount cannot be removed by attaching a hex bolt to the range where the angle can be adjusted. ■Brand: Kaedear

[Manufacturer's warranty]
■Manufacturer's warranty period: 1 year (expires on the same day as purchase)
Kaedia will support you even after the sale so that you can be satisfied. We have staff who are nationally qualified to handle your questions about the product, as well as questions about installation on your motorcycle, so we will respond appropriately to your specialized knowledge. If the problem is diagnosed as being due to a product defect, we will review it based on our manufacturer's warranty regulations and repair or replace it free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be half the period (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will respond with a spirit of hospitality. Please feel free to contact us first.