Quickhold Beetle QI USB KDR-M14A

[QI charging & USB charging] Two types of input methods: vehicle 12V and USB (QC3.0). QI wireless charging and USB charging can be used simultaneously. ■ Output: QI 15W / 10W / 7.5W / 5W, USB (Type C) 18W (5V3A / 9V2A / 12V1.5A) * Charging will be performed at the power required by the model. ■ 12V input: Connect to the vehicle 12V power supply to use wireless charging and USB power. * Cannot be used in battery-less vehicles, 6V, or 24V battery vehicles. ■ USB input: Connect to USB power supply QC3.0 for wireless charging * Main unit connector type C. It may not be compatible with USB-C power supplies. The power supply of the mobile battery may be cut off by power consumption suppression control. Do not use in rainy weather with the cap closed. ■ Waterproof: IP66 waterproof, can withstand sudden rain. ■ Power switch: ON / OFF only, does not work with USB input. When 12V is received from 0V, the power supply will automatically start. ■Wiring: 1.75m inconspicuous black double cord (positive side is white lettering line), (with fuse holder, with giboshi, can be converted to stag beetle terminal) ■Note: If you do not understand voltage drop (including professionals), please wire the negative directly to the battery negative terminal. Body earth can only be used if it is confirmed that the resistance value of the battery negative terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as handles. Please be careful of voltage drop due to reduced contact area of ​​crimp terminals. * The voltage of the earth resistance is normal with no load, and the voltage drops when a load is applied. To check the power supply, be sure to measure the load voltage under the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON, and the probe is placed on the SAE connector with a gap to measure) * Voltage measurement without load does not determine whether the power supply is good or bad.

[Compatible reference models] Apple iPhone 14 / 14Plus / 14pro / 14pro max / 13 Pro Max / iPhone 13 Pro / 13 / 13mini / 12 Pro / 12 / 12 Pro Max / 12mini / SE 3 / SE 2 / 11 / 11Pro / 11Pro Max / X / XS / XR / XS Max / 8 / 8 Plus / Samsung Galaxy S series / Google Pixel 7 / 6 / 5 / 4 / 3, other QI compatible models, *Please check the actual size including the conditions of smartphone accessories such as cases. It is a conformity to hold, and the exposure of the camera is not included in the conditions. ■ Vertical width 130-175mm, width 60-90mm (Please check that the size of the smartphone model is within the range.) ■ Thickness 15mm or less (Please be careful of thick smartphone models and cases.), ■ Note: ■ The center button may not be pressed on smartphone cases with bunker rings or holes in the center. ■For models with a protruding camera, the center button may not be pressed. For models with a protruding camera such as the iPhone 15 series, you can use the phone by suppressing the amount of protrusion with a smartphone case. ■Non-compatible models: iPhone 15 series (camera protruding), Xperia, Aquos (QI charging position is not in the center) ■The wide adjuster structure allows you to adjust the width of the arm, so it can be used with vertically long smartphones. ■It can accommodate a maximum thickness of 15 mm, so it can be used with smartphones that were not previously compatible. ■The iPhone 11 series may not be able to display accurate GPS while charging wirelessly. This may be resolved by updating iOS. ■If the smartphone case contains metal or magnetism, it will detect it and the protection will be activated and stopped for safety. If the smartphone case is thick, the wireless charging distance will be insufficient and charging will not be possible. ■In case of an emergency, we recommend that you use the safety band KDR-SFB-C, or use the strap KDR-SFB-S, carabiner, etc. to connect it to the handle after setting the holder to prepare for unforeseen circumstances.

[Product Specifications] ■Holder size: Height 130mm-175mm, Width 60mm-90mm, Thickness 15mm ■Material: Aluminum alloy (mount) + polycarbonate + ABS ■Weight: 217g ■Set contents: Main body (17mm ball), bar mount (17mm ball/32mm/width 15mm), mirror mount (clamp 22mm/M10/thickness 7mm), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, hex wrench, SAE harness (fuse holder/giboshi), conversion terminal (flat Y-shaped/stag beetle terminal), spare fuse, cable tie, instruction manual ■Brand: Kaedear

[Manufacturer's warranty]
■Manufacturer's warranty period: 1 year (expires on the same day as purchase)
Kaedia will support you even after the sale so that you can be satisfied. We have staff who are nationally qualified to handle your questions about the product, as well as questions about installation on your motorcycle, so we will respond appropriately to your specialized knowledge. If the problem is diagnosed as being due to a product defect, we will review it based on our manufacturer's warranty regulations and repair or replace it free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be half the period (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will respond with a spirit of hospitality. Please feel free to contact us first.