QuickHold QI USB KDR-M11A

[First-generation QuickHold QI/USB] The fastest smartphone holder on the planet that allows you to attach and remove your smartphone with one hand. Simply press your smartphone down to hold it instantly, and release it by squeezing the release levers on both sides. The holder has a built-in QI charger and USB power supply. The KDR-M11A model is recommended for those who find it troublesome to attach their smartphone to the holder, the side buttons interfere with the holder's arms, the entry-level Kaedia model is enough, or they want a holder that supports QI charging and USB power.

[QI charging/USB charging] Connect to the vehicle's 12V and switch between QI charging and USB charging with a switch. ■ Output: QI 15W/10W/7.5W/5W, USB (Type C) 18W (5V3A/9V2A/12V1.5A) *Charges with the power required by the model. ■ 12V input: Connect to the vehicle's 12V power supply to use wireless charging and USB power. *Cannot be used with battery-less vehicles, 6V, or 24V battery vehicles. ■ USB input: Cannot be used with USB input. * USB input model: KDR-M11A-1 ■ Waterproof: IP66 waterproof to withstand sudden rain. ■Power switch: Qi-OFF-USB switching type (QI and USB cannot be used at the same time.) ■Wiring: 1.75m inconspicuous black double cord (positive side is a line with white letters), (with fuse holder, with giboshi, can be converted to stag beetle terminal) ■Note: If you do not understand voltage drop (including professionals), please wire the negative directly to the battery negative terminal. Body earth can only be used if it is confirmed that the resistance value of the battery negative terminal and the earth point is 0Ω. Do not connect to earth at points with unstable resistance such as handles. Please be careful of voltage drop due to reduced contact area of ​​crimp terminals. * The voltage of the earth resistance is normal when there is no load, and the voltage drops when a load is applied. To check the power supply, be sure to measure the load voltage under the following conditions. (When the wiring is connected and the circuit is established, the power switch of the smartphone holder is ON, and the probe is placed on the SAE connector with a gap and measured) * Voltage measurement without load does not determine whether the power supply is good or bad.

[Compatible reference models] Apple iPhone 13 / 12Pro Max / 12Pro / 12 / 11 Pro Max / 11 Pro / 11 / XS Max / XR / X / 8 Plus / 8 / SE 3 / SE 2 / Samsung Galaxy S series / Google Pixel 5 / 4 / 3, other QI-compatible models, *Please check the actual size including the conditions of smartphone accessories such as cases. It is suitable for holding and charging, and camera exposure is not included in the conditions. ■ Vertical width 132-175mm, horizontal width 68-85mm (Please check that the size of the smartphone model is within the range.) ■ Thickness 12mm or less (Please be careful of thick smartphone models and cases.) ■ Note: ■ The center button may not be pressed on smartphone cases with bunker rings or holes in the center. ■ The center button may not be pressed unless the back of the smartphone is flat. Models with protruding cameras such as the iPhone 15, 14, and 13 series can be used by flattening them with a smartphone case. ■Non-compatible models: Kyocera Torque (thick), Sony Xperia (vertical), iPhone 15 / 14, Pixel 7 / 6 (camera protruding), Xperia, Aquos (QI charging position not in the center) ■ The iPhone 11 series may not be able to display accurate GPS while wirelessly charging. This may be resolved by updating iOS. ■ If the smartphone case contains metal or magnetism, it will be detected and protection will be activated for safety and will stop. If the smartphone case is thick, the wireless charging distance will be insufficient and charging will not occur. ■In case of an emergency, we recommend that you use the safety band KDR-SFB-C, or use the strap KDR-SFB-S, carabiner, etc. to connect to the handle after setting the holder to prepare for unforeseen circumstances.

[Product Specifications] ■Holder size: Height 132mm-175mm, width 68mm-85mm, thickness 12mm, aspect ratio 1:2 *There will be extra width for tall smartphones. ■Material: Aluminum alloy (mount) + polycarbonate + ABS ■Weight: 195g ■Set contents: Main unit (17mm ball), bar mount (17mm ball/32mm/width 15mm), mirror mount (clamp 22mm/M10/thickness 7mm), diameter conversion attachment (12/22/25.4mm), 2mm rubber tape, hex wrench, SAE harness (fuse holder/giboshi), conversion terminal (flat Y-shaped/stag beetle terminal), spare fuse, cable tie, instruction manual ■Brand: Kaedear

[Manufacturer's warranty]
■Manufacturer's warranty period: 1 year (expires on the same day as purchase)
Kaedia will support you even after the sale so that you can be satisfied. We have staff who are nationally qualified to handle your questions about the product, as well as questions about installation on your motorcycle, so we will respond appropriately to your specialized knowledge. If the problem is diagnosed as being due to a product defect, we will review it based on our manufacturer's warranty regulations and repair or replace it free of charge under the manufacturer's warranty. If the product is used for commercial purposes, the manufacturer's warranty period will be half the period (for example, if the manufacturer's warranty period is 1 year, it will be 6 months, and the expiration date will be the same day as the purchase date plus 6 months). For details, please see the manufacturer's warranty regulations on the official website. We will support you even after installation and use. As a Japanese manufacturer, we will respond with a spirit of hospitality. Please feel free to contact us first.